2009 Bottom paint - Pettit SR 21 - two additional coats added
2009 Keel and Rudder - Pettit Vivid sanded off, then sealed with West System w/ 422 barrier additive, painted w/ SR 21
2009 New tiller/rudder bushings
2007 bottom paint - Pettit SR 21 - two coats added
2006 new Lewmar #16 primary winches - two speed
2005 cabin top winches serviced
2005 Bottom job by Mainsail Marine - SR 21 on Hull, Pettit Vivid on Keel & Rudder
Rigging:
2011 re-bedded port shroud chainplates - upper and lowers
2009 new masthead sheaves and pins - 2 Nylatron V-groove sheaves, with bronze center bushings, forward for headsails from Rig-Rite(very fast!!), 1 Delrin sheave aft for main
2009 new spinnaker halyard block at masthead - Harken AirCarbo 57 mm
2009 new backstay controls to run continuous line to traveler - 7 new harken air carbo 40 mm blocks & Harken 150 cleats, new Excel Pro 5/16" line
2009 Spinnaker and Jib Halyard exit plates added stb side of mast, with new Harken 150 cleats, on custom mounting brackets (Note: main halyard and aux jib halyard run to cockpit)
2009 new genoa lead blocks - Harken Aircarbo 57mm, and Ronstan track cars
2006 lightweight spinnaker sheets
2005 all halyards replaced with low stretch tapered halyards - New England Endura braid V12 stripped and spliced to XLS 5/16" line
2005 all shrouds and connectors replaced - West Marine custom rigging service
Other Stuff:
2009 new Windex
2006 Anchor, chain rode and line package - used once
2004 Honda 4 stroke outboard - 2 hp - serviced in '07 & '08 & '11
Also with boat: Spinnaker pole, ladder, fenders, boathook, two tiller extensions, porta-potti, cabin cushions, cable w/ combination lock for outboard
The boat sold at the end of august. thanks so much for your website.
Greenville, South Carolina
