All deck hardware, exterior wood, port lights, and hatches were removed. Fastener holes that passed through cored areas were oversized, filled with thickened epoxy and then drilled.

While apart the topsides and superstructure were faired, primed with 545 epoxy primer then sprayed with 2 coats Awlcraft 2000 vestal white and 1 coat clear.

Non-skid areas were set off with ice blue Awlgrip.

Boot stripe and molded cove stripe in Vivid red Awlgrip.

Paint quality is excellent.

Below the waterline was soda blasted, 5 coats of West System with barrier coat additive then 2 coats Ameron 235 epoxy primer and 2 coats Micron Extra Blue.

Bottom is smooth.

Centerboard removed and pennant replaced from board to winch.

Centerboard works as it should.

Wood grain formica was removed from interior and bulkheads/furniture painted with buff colored enamel and accented with varnished black walnut and teak.

New mast

New standing rigging

New chainplates

New running rigging

New mainsail (North)

New jib lead blocks

New motor (Tohatsu 6hp 30" shaft 4 stroke)

New stanchion bases, stanchions and lifelines

New Raytheon Bidata knot/depth meter

New Plastimo Compass

New Paneltronics electric panel

New battery