|
Go to Sailing Texas classifieds for current sailboats for sale
Com-Pac 19XL, 1999, "Blue Boat",
presently on a mooring at Kingman's Marina, Cataumet, Massachusetts
***Boat can stay on the mooring for the rest of the season. Mooring fee has been paid.***
Hull No. 611
Ballast: 800 lbs
LOA 20' 1"
LWL 16' 4"
Beam 7'
Draft 2'
Displacement 2000lbs
Sail Area (Total) 196 sq. ft.
Blue hull
Stainless steel bow pulpit
Anchor platform with bow roller
CDI roller furler
Lifelines with gates
Stainless steel split pushpit with stern rail seats
Mainsail and 150 jib in good condition
All running rigging replaced in last 3 years
Electrical package - Navigation, steaming & cabin lights
4 opening ports with screens
3 winches and winch handle
Lexan deck hatch
Bottom painted with Pettit Hydrocoat SR antifouling paint
6hp 4 stroke Nissan outboard
Trailer in good condition with 2 new tires purchased in 2012
1 spare trailer tire.
2012 Rebed all ports and replaced gaskets
Installed nylon bushings in pintles and gudgeons
New transom boarding ladder
2013 Removed rub rail and rebed all bolts on hull-to-deck joint and skim coated joint with 3M 5200
Rebed chainplates
Rebed deck hatch
Rebed outboard motor mount and installed backing plates
Replaced bow cleat with Samson Post with backing plate
New 6" skene chocks
Built new battery box platform closer to boat's centerline
New deep cycle group 24 battery
New electrical bus bar to clean up wiring at battery
Installed new cabin DC accessory outlet
New 10 watt Sunforce solar panel and SunGuard charge controller
New hasps on cockpit lockers
New Garhauer stand up jib track blocks to improve run of jib sheets to winches
New clam cleats to quickly secure jib sheets
New main halyard, jib sheet and furler line
New Spinlock stanchion lead block and bullseyes for furling line
New 200' anchor line plus about 14 feet of chain
Danforth anchor
New porta-potti - never used
2014 New high performance rudder blade from Rudder Craft Inc.
New Ritchie Navigation B51-G bracket mounted compass
Rebed bow loop and installed backing plate
Sanded and finished anchor platform
Sanded and finished tiller
Installed WaveFront tiller clutch
Sails serviced by Squeteague Sailmakers
2015 New deck plug for mast steaming light.
New Hatch boards
Outboard motor - all the usual yearly maintenance:
Check/Replace spark plug
Change engine oil
Change lower unit oil
Change fuel filter
Replaced impellor and gaskets at end of 2014 season.
New fuel line and connections from external fuel tank to motor in 2014
Performance Boat Trailer
2012 New tires
Repacked hubs
2013 New carpet on bunks and keel guides
2014 Replaced all wiring and installed new LED lights (tail lights, side marker lights and clearance lights)
|
Sailboats for sale
Catalinas/Capris for Sale
Hunters for Sale
Macgregors/Ventures for Sale
Sailboat Photo Gallery
|
