This 2021 Tandem Island is in excellent condition.
It includes all of the standard, factory supplied items which are:
The main hull, 2 amas, deck-mounted crossbars, and 2 akas with carrying bag
Carbon fiber mast, vertically-battened roller-furling sail, main sheet, and carrying bag
Two MD180 mirage drives with forward/reverse and kick-up fins
Two pedal retention hooks/bungees
Two Vantage CT seats
Port and starboard trampolines
Dual Rudder Deployment and Retraction Controls
Dual Steering Controls
Four molded-in Cup Holders
Four Mesh Stowage Pockets
Retractable, Kick-Up Centerboard
Kick-Up Island Rudder
Large Bow Hatch with Bungee Tie-Downs
Rear Cargo Area with Bungee Tie-Downs
Three 8" Twist and Seal Hatches
One gear storage bin for an 8" hatch
Two 2-Piece kayak paddles with on-aka storage
Two Molded-In Rod Holders
Two drive-well plugs
Two carrying handles
Harken Blocks throughout
Spare rudder pin, aka pins, and wrench
Included is a galvanized Continental trailer with submersible lights, a wheel-jack, spare wheel and tire, winch, custom hull-conforming bunk boards to prevent hull distortion, tie-down straps, a centering guide for loading, and padded racks for transporting extra gear such as the hakas, running boards, and cargo racks described below
The boat comes with extensive additions for camp cruising to allow sleeping onboard and transport of camping, fishing, and diving equipment.
A PVC riser frame holds the mainsheet out of the sailor's way when tacking. It incorporates a headrest, elevated solar anchor lights, and a gear storage box with access from the rear cockpit while sailing.
Padded hakas for outboard seating , a tiller extender, and a swivel cleat to permit steering and sail control from either outboard position
Cargo Racks with two gear storage crates, anchor transport crate, and galley transport box
A flush deck over the forward cockpit with two hatches for wet storage such as anchors or dive gear
A Kamprite folding cot/tent with carrying bag that can be mounted on the deck for sleeping onboard or used ashore, with "running boards" for additional standing room when the tent is deployed afloat
A Quick Release Anchor System consisting of a grapnel anchor, chain, 200 feet of nylon line, retrieval float, tripping line to a bow shackle, and a storage crate that fits on a cargo rack.
A Richie Xp-99w Kayaker Compass is mounted in the rear cockpit
Steering knob for the rear tiller
A Seattle Sports Paddler's Bilge Hand Pump and extension tube
Vinyl tubing pads to protect the akas when the hakas or cargo racks are used
Anti-rattle pads on the forward drive well plug
Below-deck storage box and vinyl pad to block drive well and protect hull
2 dock lines
All of the additional features and items have been incorporated without cutting or drilling the hulls. Lashing and clamping techniques were used throughout so all mods are completely reversible and non-destructive. Components can be used in different combinations and the boat can be easily reverted to the standard dual-cockpit/dual-seat mode.
The enhancements, additional equipment, and how everything works together are illustrated and described in the video
