Full restoration was done 5 years ago. It is still in mint condition and is currently stored in the great salt lake right now. Comes with the trailer and everything pictured like the stove and grills ETC. I will also leave the Denatured alcohol and propane on board with plates and glasses ETC. Also comes with 3 Extra PFDs and everything else mentioned below. Let me know if you need more info or anything else.
New roller furling schafer cf-500 with Genoa 140% (2 years old, still crispy)
Has the old hank on 90% jib and forstay if you want to swap standing rigging all replaced 3 years ago, some of the running rigging is 2 years old. New boom vang this year
2.6’ draft can be sailed anywhere in Utah
has an automatic bulge pump
brand new trailer with extension built in for any boat ramp. All lights are new and work
pop top for companionway
VHF radio and accessories like depth gauge, cabin, bow, steamer and masthead lights.
boat hook and paddle, PFD’s
luggable loo toilet in v berth area
comes with a self raising mast kit that you plug into a battery
kick up rudder and swim ladder
new custom tailored cover made for the boat for storage or transport, also has sail cover.
2 danforth anchors with brand new 100 ft of rode
magma grill that hangs off the stern pulpit and a origo 3000 alcohol 2 burner stove
Johnson sail master 8.0 outboard serviced a couple years back starts great and fast
all new vinyl cushions all over the boat
all teak has been oiled up as of last month
dinette table folds down and has a cushion to turn into additional sleeping space
There’s much more so either text, call or come visit and I'll take you sailing
Additional info, I bought it from a couple in Jackson Wyoming back in 2022 and they did a massive resotaration ($38K from the receipts I found, maybe more!) and have kept it in great shape since. It's been in fresh water for the 2.5 years I've owned it and just over the winter put it in the GSL and sailed it since November there. It's turnkey and has nothing that needs doing or fixing on it. The only thing I can think of is the jib halyard sheave may need replacing and I have new ones on the boat ready to swap them out whenever. There also are a ton of tools and stuff I will leave on the boat and everything is neat and clean. no mold or softspots or anything like that.
